Sunday, January 30, 2011

Picture honda pgm fi struktur

Picture honda pgm fi struktur























The honda pgm motor cycle histories

honda pgm motor cycle histories

Honda began more than 20
years ago to develop a FI
system to continuously provide
The optimum air-fuel ratio
required by the engine using
electronic control techniques.
Since then, Honda has been
actively promote the
application of the FI to
motorcycles as a technique to
to achieve ecological
performance and a high level
handling.

In 1982, Honda launched the
first-in-the-world, fuel injected
CX500TURBO motorcycle,
who achieved both a better
acceleration
and better than the CB900F
fuel economy than the base
Model CX500. In 1998, the
eco sport
tourer model was VFR800FI
the market. This model, using
the PGM-FI and the new
developed three-way catalyst,
reaches 1 / 30 CO emission and
1 / 10 HC + NOx emissions
The EURO1, which is the
European emission standards
regulations adopted in 1999.
And now, the race machine
'RC211V' is
dominates the MotoGP races.

The "RC211V" uses the PGM
FI, which helps in allowing the
overwhelming power
the RC211V to be checked
efficient use of the rider.
Honda always keeps improving
the fuel injection system
the highest level of technical
competition.
The first engine equipped with
with an electronic fuel
Injection - CX500TURBO
In the late 1970s, Honda R & D
was filled with enthusiastic
to achieve "core
technologies that would
the development of new
technologies in the year 1980 ".
Through discussions about what
should be the core
technologies, "turbocharging"
was chosen, and CX500
was selected as the base
model. Honda defined the
goal of "turbo"
not only as an extra boost of
ability of a large
displacement, but a
increasing the specific power
of small-size
engine, and an increase in
thermal efficiency by reducing
The friction losses at
output. Simply put, it was
both an increase in reach
power and reduce
in energy loss. Most critical in
development were the
turbo charger and fuel
injection systems.

The
CX500TURBO ultimately made
The first stage of innovation
in the 1980s with his
acceleration
better than the "CB900F" and
fuel economy better than the
base model "CX500".
Computer controlled fuel
injection
One of the characteristics of the
CX500TURBO was
practical application of the
Computer controlled fuel
injection. Instead of
using the then-conventional
airflow meter, computer
controlled fuel injection
system calculated the
injection volume with the two
control charts, ie, one for the
boost area where the basic
injection volume was
determined by the engine
revolutions and the boost
pressure, and the other for
The area where the throttle
Basic injection volume was
determined by the engine
revolutions and throttle
opening. The actual injection
volume was adjusted by the
intake density compensation,
inlet pressure and / or
inlet air temperature,
Supplement for acceleration,
warm-up, starting the
compensation for the battery
voltage, etc.

Also
included in the computer
controlled fuel injection
system is a self-diagnosis
system activated
warning light and the backup
system for the engine to keep
performed when a fault
occurred in the system.
CX500TURBO
The racing machine of the 21st
century - RC211V
In the world of championship
motorcycle road racing, the
requirements of the machine
Pinnacle 500cc class
underwent a drastic reform,
and changed its name to
"MotoGP" in 2002. The
device regulations changed
a 2-stroke, 500cc engine
a 4-stroke, 990cc maximum
displacement, and the name
of the class was changed to
"MotoGP". The Honda RC211V
The machine was
developed to meet the new
regulations. Honda
developed a unique motorcycle
V-5 configuration.

After dominating the races in
the debut year 2002, the
RC211V will win in a
overwhelmingly in 2003.
RC211V
FI provide superior control
driving
MotoGP machine
completely closed or partially
open gas conditions
way more than the
Formula 1 race cars, for
example. Compared with the
Formula one car that use
fully open gas
often, the manageability
of power is more
critical than the maximum
power. Honda
developed and implemented new
techniques for beautiful offer
handling of the PGM-FI
used in the RC211V.
Twin Injector
Providing the multi-bend
levigation hole injectors
before and after the throttle
valve, and each one
provide the low load zone
(After gas) and high
load zone (gas)
both driving and
high power are
realized.
Variable fuel pressure control
The accurate control of fuel
and gas supply
manageability are achieved by
The ECU continuously
controlling the fuel pressure.

Predictive control of the remaining
fuel injected
When the throttle is opened
or closed (fully open, fully
closed, not when kept in a
partial opening), the "amount
of fuel stick "at the inlet
port walls and flows into the
combustion chamber during the
The following combustion
cycle is predicted and used
the control to ensure
most appropriate air-fuel ratio for
improve the ride quality
and fuel consumption.
List of Honda motorcycles
equipped with PGM-FI
The PGM-FI is one of the most important
technologies to achieve
goals of clean exhaust and
fuel. An inevitable
next goal is to extend the
the application of innovative
technique for models in various
categories that respond to a
larger number of users.

With the newly developed
compact PGM-FI, Honda
increases the application of the
large Touring models, the
Super Sport models, and
models aimed at
more people.
Honda Worldwide Home Motorcycle Technology Close-up Picture Book
Fuel Injection System for small engines

New honda pgm fi CBF 125

New honda pgm fi CBF 125



Development of an ECU
Integrated Throttle Body
module for an electronic fuel
injection system for small
motorcycles
Honda has a goal to reduce
The total emissions of HC
(Hydro-carbon) of new
vehicles to about 1 / 3
and to further improve the
Average fuel consumption
approximately 30% (both from
1995) by the year 2005.

to
realize the goal, we at Asaka
R & D Center believes that
The small motorcycles used in the
many countries around the world
further improved
clean exhaust and low
fuel.

That's why we started
the development of the PGM-FI
system for small motorcycles
with engines of 125cc or
smaller, including air-cooled
engines.

To ensure clean exhaust
and high fuel consumption,
combustion control by
precise fuel supply is a
need.

If the conventional FI
System (electronic fuel
injection system) applied to
motorcycles is large and
expensive, the application is
usually in large motorcycles
the use of multi-cylinder engines.

The newly developed PGM
FI, in order apply to small
displacement models, the
obstacles
completely eliminated by using
Honda's techniques to down-
size of parts and
maximum use of the FI
techniques derived from the
large motorcycles.

the
compact PGM-FI offers new
benefits such as reducing
environmentally released
harmful substances and
improving
driveablity, economics, etc.

* PGM-FI is a registered
trademark of Honda Motor
Co., Ltd.

New honda revo-at matic spesifikasi

New honda revo-at matic spesifikasi



Make cyclists
berpersneling automatically, Revo
Matik could be
choice. Furthermore, the price of
matic vehicle is not
too expensive.

Not only
that, efisien fading
all perceptions of AT vehicles
must have been extravagant.
Imagine,
with 1 liter can
distance to 57
kilometers.

indeed
efisien not a duck, but this
A performance
very nice.
In addition, technology
embedded in the Revo Matik
This is the capacity
prevents water in the
engine when the flood came.

With So, we do not
fear of crashing again
floods, because this engine
can
that the blocking
Revo price is not Matik
quite expensive.

Fortunately, the
have this vehicle,
for now
unnecessary
AMTI more bang machine
ingress of water.

Problem of the environment
kindness,
Revo Matic reportedly been
meet the Euro 2 dock.
Gas emissions and also dump
reduced from
another motorcycle. with
So, you do not
more
feel guilty
ozone layer.

Now, with this automatic,
You can walk everywhere
without fear of adding
environmental pollution.

It is also a sign that
Honda can always meet
consumer needs. more
remember my article on
Honda Scoopy price, which
surprising, because
new-retro? that
Why Revo Matik
issued, given the model
matic now very
missed by fans
automotive.

Okay, I'll
tell
Matik Revo price. allegedly
still about Rp. 15.8 million.
Interested in buying?
Sure.

New Honda Scoopy indeed bring atmosphere



New Honda Scoopy indeed bring the atmosphere
Your fan motors
Matic?
It's time that you
know the price of Honda
Scoppy, so you can
immediately
have it. Scoopy of
a major innovation of
Honda to
thanks to the automatic
market.

Meanwhile, competition
in
This market was very
increasingly competitive with
number of engines
expressed by some
the major manufacturers such as
Yamaha and Suzuki.

However, Honda Scoopy
indeed bring the atmosphere
news. Meanwhile, the models
other manufacturers
tend to
very similar and difficult
distinguished, unless you
indeed very interest
in the automotive world.

However,
with the look and features
different, this new variant
ready to enter the market
with
any excess. If
others tend to fashion
modern and seem cool
This product provides
classic retro feel.

See
Just the image below:
Scoopy with
110cc engine and
hardware system
fuel injection. For keiritan,
not yet
matching duck. you
requires pemium liters
a distance of 49 km.

Indeed, with the price
more expensive than other
automatic
These motors work
hit the market with
keasn good. In addition,
color
admirable, there are red
pink and green. guaranteed
you are the center
attention.

If further investigation,
Honda Scoopy indeed very
imitate the style of the bike
Japan. with some
changes to
consistent with
Indonesia, the engine is still
shades look Japanese.

But it is important not
want
imitate anyone, which is
important
the style is not it? Well, for the
price
Honda Scoopy, in new lines
I read in
number 13.5 million. This is
instead
slightly more expensive than
Similar automatic cars
products,
but according to quality

Reviews honda vario scooter matic spesifikasi

Reviews honda vario scooter matic spesifikasi




Reviews honda vario scooter matic spesifikasi
Length X width X height: 1897
x 680 x 1083 mm

Wheelbase: 1273 mm

The lowest to the ground
Distance: 132.5 mm

Empty weight: 99.9 kg (type
spokes)
99.3 kg (Type CW)

Type order: Spine
Type front suspension:
Telescopic
This type of rear suspension:
swing arm with
Single sokbreker

Front tire size: 80/90 - 14 M / C
40P

Rear tire size: 90/90 - 14 M / C
46P

Brake front: hydraulic disc
type
with double piston

Brakes rear: Tromol

Fuel tank capacity
fuel : 3.6 Liter

Engine type: 4 Step, SOHC

Diameter x measures: 50.0
mm x 55.0 mm

Volume step: 108 cc

Comparison of compression:
10.7: 1

Maximum Power: 8.99 PS /
8000 rpm

Maximum
Torque: 0.86 kgf.m /
6500 RPM

Oil Capacity
engine oil: 0.7 Liter in
periodic replacement

Auto Clutch: Automatic
centrifugal
dry type

Dental transmsi: Automatic,
V-Matic

Pattern transfer gear: -
Starter: Pedal and electric

Battery: 12 V - 3.5 Ah

Spark plugs: ND U22FER9 /
NGK
CR7EH-9

Ignition System: DC - CDI,

battery
High seat: 758 mm

Cooling system: Cylinder
tunggalPendingin
with fluid (liquid
cooled)

The composition of cylinders:
Single Cylinder

Carburetor: VK22 x 1

Headlights: 12 V 25 W / 25 W x
2

Lights twilight: 12 V 3.4 W x 2

Saturday, January 29, 2011

explanation honda pgm struktur

We want to actively

to introduce environmental

vehicle technology

used by several people.

In doing so, we want

help improve

Global Environment

even a little. This is

base position for Honda

Environmental Technology

including fuel consumption

and cleaner exhaust gas.

Asaka R & D Center has developed

PGM-FI technology developed

for short trips

engines such as 125cc and

newly developed

electronically controlled fuel

injection devices, PGM-

FI, suitable for use in 4-stroke,

50cc scooters, the current

marketed by Honda as "Net

4 ".

World's First as a mass

produced 4-stroke, 50cc

Motor

Electronic control

fuel injection system, PGM-FI

with fuel

consumption and net

flue gas is

developed for mass-produced

50cc 4-stroke engines to

first time in the world.

With this technology,

further reduction of fuel

consumption and net

flue gas will be promoted

for the 50cc engine class

including the largest sales

domestic market.

Technology Features

The most remarkable feature

CAG is the integration of

Starter control and PGM-FI

the shield through

installation of processors that are higher than

32bits. In addition, new

technology has been developed

to mount a 50cc

scooters, including the new

injectors, ultra-small fuel

circuit pump and a new system

to revive. In addition,

number of copies

15-8 is reduced as

compared with PGM-FI

designed to model a large

through the efforts

integration of various functional

section, detection of consolidation

functions and new design

The main parts including fuel

pump. Low cost, compact

electronics and light

controlled fuel injection

system has been achieved.

Built ECU

It functions

consolidation for low

costs through the adoption of high

CPU speed and 32bit

PGM-FI integrate control

ECU with ACG starter

control ECU. In comparison

with conventional 16bit

Processor speed, the treatment was

increased and 3.5times

doubled the memory capacity

which allows the integration

FI control and ACG

control starter in the shield.

Compared with the ECU to

for conventional 50cc

scooter, reduced size

21%.

New ECU 32bit 32bit processor performance

Compact fuel pump

To keep the floor flat to

50cc scooters, ultra-compact fuel

The new pump module

developed, which can

housed in a flat fuel tank

located under the floor.

Adoption of the first 10 microns

The highest density filter in

world has led to

substantial reduction

number of rooms and in

realization of compact

and lightweight. In addition,

energy-saving and high

efficiency has been achieved

produce a level of classification

1A.

The new injector

The number of gasoline

required for combustion in

small-displacement engine

very small as 50cc

and small amounts

gasoline must be burned as

efficiently as possible. There is

It is therefore necessary to fuel

injectors one minute

number of injections that are consistent

with the atomization of fuel

spraying. In general

practice before the

injection of a few holes to

The purpose of atomization.

In

injector developed at this time

for the 50cc engine, world

The highest levels of atomisation

achieved by optimizing

form of internal parts

injector with two

hole injection, reducing the

number of injection level

1 / 3 of the 125cc scooters.

Double-hole

injector

Comparison of minimal

number of injections

Atomization performance

highest in the world

Idle air control valve

Minimum

controlled air time

idling, etc. should also be

reduced to one third of the 125

scooter. On the air valve

developed this time for 50cc

machine, made

allows optimal control

amount of air to

Machine condition

operations such as start,

Warming and Idling

detail the operation of high

valves with ultra precision

stepper motors in small units

30 um. As a result, a

substantial increases

made in the ease of starting

and performance and idling

maintenance performed

do not need secular

changes.

Control start

Start a conventional

based on the engine carburetor

system, the piston

operated by motor or by cell

backlash and negative

pressure and mechanical

action butterfly sucking fuel

out. In electronic form

controlled fuel injection

system, however, electrical

power required to inject

fuel to the engine.

For small motorbikes, such as

50cc scooters, kick-off

necessary if the full

battery discharge, after

after eating for a long time

time. In the new PGM-FI

developed for 50cc scooters,

machine starts with a small

electrical currents created by

kicking, which is difficult in

Conventional FI system.

Turning on a reliable machine

made possible by kicking, even

when the battery goes

dead, through the development

power system

produced by kicking in

only a fraction of a second

circuitry required for

initial energy and fuel savings

pump.

For kicks, CAG

produce energy. Small

energy produced will be

given priority for

ignition and fuel

injection with a bypass circuit

batteries and lamps. The

effective time in order

is about 0.2 seconds,

equivalent to about one

suction stroke,

compression, explosion and

exhaust, or 2.5 times

kick crank rotation.

The glory of the PGM-FI to 50cc

scooter

Machine with a new

developed PGM-FI to 50cc

scooters have contributed to

Exhaust gas is cleaner and

excellent fuel

consumption levels. By

data in

development stage, and CO

HC exhaust gas reaches

half the level of domestic

control and repair it

made in fuel consumption

7% at constant speed

mode and 10% in real player

Mode *. Besides power, high

starting performance, reliable

quality and performance at idle

done.

Internal modes of test assumptions

conditions of use.

The development team

Asaka R & D Center promoted

development efforts

Honda's goal

"Passage to fuel injection

50cc scooters in the year

2005 "which was released

in 1999 and the team

managed to achieve

dreamed years earlier than

original target. The

technology will enable Honda

PGM-FI installed on all

Honda motorcycles

markets around the world.

Honda set new goals for

"Installation of PGM-FI on all

scooters are sold in domestic market

market through the exercise

2007 "and" installation of PGM-FI

on most models

worldwide by the end

In 2010 "Honda.

Motorcycle loved by

Many people across the entire width

world. Honda hopes

contribute to the environment

improve the world

further improvement

environmental technology.

Moto Honda around the world Future Technology Picture Book Close-up of the fuel injection system for small engines
Related Posts Plugin for WordPress, Blogger...